How to Write a Tech Pack a Factory Can Actually Use

A tech pack is not a design document. It is a manufacturing instruction. The test is simple: if an experienced pattern maker can read it without asking you a single question, it works. Most first-time tech packs fail not because they are too short, but because they describe intentions ("fitted", "premium feel") instead of measurements, tolerances and construction.

A pack is only as good as its numbers — composition and GSM and grade rules per market are where most revisions start.

The Seven Sections That Matter

#SectionWhat goes in itIf it is missing
1Style overviewFlat sketch, front / back / side, calloutsThe factory guesses the silhouette
2Fabric and trimsComposition, GSM, supplier or reference, all trims with sizesFabric gets substituted with "equivalent"
3ColourPantone TCX per panel, print colours, thread coloursShade disputes at final inspection
4POM / measurementsSize-graded table with points of measure and tolerancesNothing can be accepted or rejected objectively
5ConstructionSeam types, stitch density, special operations, sequence notesTwo factories produce two different garments
6Labels and packingNeck label, care label, hangtag, poly bag, carton markRework at the packing stage, or customs delays
7GradingSize range and grade rules (or "graded from base size M")Sizes do not form a set; returns spike

How to Write a POM Sheet

POM means point of measure. Each row is one measurement, defined by how it is taken, not just what it is called. Two people measuring "chest" differently produce a 2 cm dispute.

Point of measureHow to measureSMLTolerance
Chest width1 cm below armhole, edge to edge, garment flat505356±1.0 cm
Body lengthFrom HPS (high point shoulder) to hem666870±1.0 cm
Shoulder widthShoulder seam to shoulder seam, straight across424446±0.5 cm
Sleeve lengthFrom shoulder seam to sleeve hem585960±0.8 cm
Neck widthInside edge to inside edge, relaxed171819±0.3 cm

Three rules: give tolerances on every row (a measurement without a tolerance cannot be inspected), attach a diagram showing where each line is taken, and specify whether the garment is measured flat and relaxed or stretched.

The Five Mistakes That Cause Bulk Rework

  1. Adjectives instead of numbers. "Oversized fit" means nothing. "Chest 62 cm on size M, drop shoulder 6 cm" means something.
  2. No construction callouts. A flat sketch without seam types is a fashion illustration. Add a cross-section for any seam that is not standard.
  3. Colour by photo. A phone photo of a fabric is not a colour standard. Use Pantone TCX and approve a physical lab dip.
  4. No version number. Tech packs change. Without "v1, dated, supersedes v0" the factory may be working from last month's file.
  5. Labels left to the end. Care label content depends on fibre composition and market (US FTC rules, EU regulation 1007/2011). Decide before production, not before shipping.

You Do Not Need a Perfect Tech Pack to Start

Three things are enough to begin sampling: a reference garment or clear photo, a measurement table for your base size, and the intended fabric direction. We build the full tech pack during sampling — that is part of what the sampling fee covers — and you approve it before bulk.

What genuinely blocks a project is not a missing tech pack; it is contradictory input: a photo of an oversized fit, a measurement table for a slim fit, and a target price for neither. When those three disagree, the sample will satisfy exactly one of them.

Who Owns the Tech Pack

You do. The pattern, grade rules and construction file developed for your order belong to your brand, and we will not use them for another client. If you change factories later, ask for the file in DXF or Gerber format, not a PDF — a PDF cannot be graded or cut.

If you have a reference and rough measurements, we can turn them into a working tech pack during sampling. Read how private label development is structured, see what the inspection process does with those measurements, or check the FAQ on sampling. Send your reference to start.

Need the whole range rather than one category? Open the 2026 catalogue (24 pages, PDF) — 19 apparel categories and 13 footwear series, with MOQ and lead times for each.

Have a style to produce?

Send your reference, quantity and destination — we reply with a full quote within 24 hours.

Get a Quote Open the catalogue

Related guides

More in this series — Product Development

Fabric Guide for Clothing Brands: Composition, GSM and Sourcing · Building a Size Curve for US, UK and EU Markets · Custom Dress Manufacturer: A Sourcing Guide for Womenswear Brands · Custom Hoodie Manufacturing: Fabric, Print and MOQ Guide

OEM / ODM · PandOrigin

Have a style to produce? Send us your references

Send a sketch, a sample or just an idea — we reply within 24 hours with MOQ, pricing and sampling advice.

Get a Quote WhatsApp