Clothing Manufacturing for Independent Designers & Studios

Pattern making, draping and sample iterations — from sketch to production-ready garments.

Designer Brands & Independent Studios
Sourcing Scenarios

What We Do for You

The biggest fear for designer labels is seeing the sketch lose its soul in production. Our in-house pattern room and experienced sample makers turn your sketches, references or mood boards into production-ready garments — patterns, toiles, iterations and bulk, all confirmed with you at every step.

  • Pattern-making from sketches or samples, high-fidelity draping
  • First toile in 5–7 days with multi-round iterations
  • Fabric and trims development with transparent alternatives
  • Blanks from 30 pcs to match indie launch rhythms
  • Approved-sample specs archived for stable bulk reproduction

Ideal for independent designer labels, private lines of boutiques, studio founders and made-to-measure ateliers.

Get a Quote Products
Sourcing Scenarios

From sketch to production: pattern making, sampling and five gates

Sampling goes wrong in four places, not twenty

The most common frustration for designers: the sketch is right, the sample is not.The cause is rarely the factory's sewing — it is four information gaps. Close them before the pattern is cut and your hit rate moves from one in three to two in three.

Proportion not carried over
A 1–2 cm shift at the shoulder line, sleeve cap or waist changes the whole silhouette. It has to follow your intent, not a standard block.
Fabric hand substituted
A drapey fabric replaced by a stiff one collapses the design. Touch the substitute first, then compare GSM and composition.
Construction never specified
Topstitch, blind hem and bound seams read completely differently. A construction sheet must exist before sampling.
Size chart copy-pasted
Default S–XL grading abandons the fit. Set measurements from the target body and the wearing occasion.

As a clothing manufacturer for independent designers, our practice is to issue a construction confirmation sheet before pattern making: pattern source, fabric GSM and composition, key construction points, size chart. You sign off, then we cut.

Pick the model first: OEM, ODM or CMT

All three are called manufacturing, but the responsibility lines sit in different places.Choose wrong and every quote, lead time and risk allocation downstream follows. The single question is: what are you short of — a pattern, fabric, or capacity?

OEM (private label)ODM (design + make)CMT (cut, make, trim)
Who designsYouUs (you change colour, fabric, details)You
Who makes the patternUsExisting block libraryYou, or pattern fee quoted separately
Who buys fabricUsUsYou (risk sits with you)
Minimum order500 pcs / style500 pcs / style500 pcs / style
Quote structureFabric + labour + trimsFabric + labour + block licencePer-piece labour
Style exclusivityHighMedium (same block may be reused)High
Best forDesign locked, needs faithful replicationEarly stage, no pattern room, fast to marketOwn fabric channel, cost sensitive

Many designers mix the three: OEM for the launch style to get the pattern right, ODM for mid-season fill-in, CMT for basics where cost matters most. We operate as an OEM clothing manufacturer, an ODM apparel supplier and a CMT cut and sew partner at the same time, and switch by style rather than by season.

Pattern making and sampling: 5–7 day first pattern, 2–3 rounds

Our pattern making service covers two routes: pattern from a sketch and reverse-engineering a sample. The first needs front, back and detail views, a reference garment or mood board, and target fabric. The second dismantles the garment, measures it and rebuilds the pattern. A physical sample almost always yields a closer match.

1
Pattern · 1–2 days
CAD pattern in both net and seam-allowance versions; collar, armhole and waist checked separately.
2
Toile · 5–7 days
First version in calico, testing proportion only. Changes here are the cheapest you will ever make.
3
Sample · 2–3 rounds
Made in the final fabric: check effect, trim hand-feel, and how the size chart behaves on bulk cloth.
4
Sealed sample
Approved sample and trims are sealed; bulk is matched against it and deviations are traceable.

Sample development includes free revisions; rebuilding in a different direction counts as a new style. Two extra days at toile stage is always cheaper than a remake at sample stage.

Pattern room capability: patterns, grading, marking, shrinkage

An in-house pattern room means four things stay under our control instead of being subcontracted.These four decide whether bulk fits like the sample.

Pattern accuracy
CAD patterns in net and seam-allowance versions; collar, armhole and waist double-checked.
Grading rules
Graded by target-market increments, not uniform scaling. Japan, EU and Middle East grade differently.
Marking efficiency
85%+ fabric utilisation on plain goods; 75% on checks and stripes that must be matched. Build that loss into the quote.
Shrinkage
Every fabric is tested on arrival and the pattern is compensated. Cotton, linen and wool vary by batch — retest each lot.

Fabric and trim development: how substitutes get chosen

Designers usually start from a feeling, then discover the fabric has a 1,000 m minimum. We do not answer "cannot do it" — we quote three tiers and state exactly where each one differs.

OptionFidelityCostMOQ / lead time
Same handGSM and composition close, minimal touch differenceBase lineStock fabric, ships same day
Same lookVisual match, slightly different hand20–30% lowerStock fabric
Custom weave / dyeExact match to the original15–20% higher plus dyeing300–500 m, plus 15–20 days

Trims carry as much of the perceived quality as fabric: zip glide, button thickness, lining weight, thread lustre. Seal them together with the sample so bulk is bought against the same reference.

How larger runs get the cost down

Low MOQ private label runs are expensive in four specific places. Those four are also where the savings sit — this is cost structure, not sales talk.

Fabric minimums
Stock fabric in 40+ base colours: no custom weaving, no dye-lot waiting, no 300 m threshold.
Cutting lay
Short lays or single-ply cutting, so you are not over-producing to fill a lay.
Style changeover
A 6–8 person cell rather than a 100-station line; changeover time is spread thin.
Trim standardisation
Stock zips, buttons and lining — cheaper than specified brands and available immediately.

One more: run several colours in the same style. One cut, one machine setting, changeover cost amortised. Together these pull the first-order unit price down noticeably — we quote quantity tiers side by side so you can see the effect.

Design confidentiality: no copying, no reselling, no public rack

Designers worry most about being copied. We treat this as a hard constraint, not a promise.

NDA
Signed before the first technical discussion; your version of the clause is acceptable.
Segregated storage
Your patterns, tech packs and samples are stored separately — never on the shared sample rack.
No resale
The style is not produced for anyone else, and not sold on after minor changes.
No public use
Not photographed, not used as a case study, not shown on any platform without written consent.

Pattern and block ownership stays with the brand, written into the contract. On termination, patterns and technical files are handed over or destroyed at your instruction.

From first enquiry to delivery

1
First enquiry
Sketch or sample, target price, launch date. Feasibility answer the same day, not in three.
2
Construction sheet
Pattern source, fabric, construction, size chart — signed off before pattern making.
3
Pattern and toile · 5–7 days
Calico toile to verify proportion; changes concentrated in this round.
4
Sample approval · 2–3 rounds
Final fabric, with trims and packaging confirmed at the same time.
5
Bulk · 15–25 days
Production against the sealed sample, with mid-run and final inspection at AQL 2.5.

For a first order, do not spread across every style. Run one or two hero styles to validate the pattern and construction, then extend. If the first version drifts, the loss stays inside one style.

Key specifications

MOQOEM 200 pcs · ODM 200 pcs · CMT 200 pcs per style; blanks from 30
Toile5–7 days
Sample rounds2–3 within two weeks
Bulk15–25 days
Pattern roomCAD patterns, grading, marker, shrinkage testing
ConfidentialityNDA available, patterns owned by the brand
Inside the Factory

Pattern making, cutting, sewing and inspection all happen in-house

Sample room: toiles of the same style line up, so each revision is compared side by side.
Sample room: toiles of the same style line up, so each revision is compared side by side.
Fabric library: stock swatch books on the shelf — a test run does not wait for a dye lot.
Fabric library: stock swatch books on the shelf — a test run does not wait for a dye lot.
Sourcing Scenarios

Frequently Asked Questions

What is the minimum order for a private label?

All three modes start at 200 pcs per style (blanks from 30); different colours of one style can be combined. For a first order, prove one or two lead styles

I only have a hand sketch or a reference garment — can you develop it?

Yes. We work from sketches, from a physical sample, or as an ODM adaptation of an existing block. Front and back drawings with details, a reference garment or a mood board is enough to start; a full tech pack is not required.

How do I choose between OEM, ODM and CMT?

If you need a pattern, choose OEM: you own the design, we develop and produce. If you need speed, choose ODM: adapt our block with your colours and fabrics — faster to market but less unique. If you have your own fabric and only need capacity, choose CMT: making charge only. All three modes share the same minimum: 500 pcs per style.

Who owns the pattern and the design?

You do. On order confirmation the pattern, block and construction file belong to the brand; we do not produce the style for other clients, and we sign an NDA on request. On termination the pattern is transferred or destroyed as instructed.

What does sampling cost, and is it credited?

Typically USD 80–200 per style, including the toile and one revision. Complex builds — down, tailoring, draped pieces — are quoted separately. The sampling fee is credited in full against the bulk order.

How many revisions are included?

Pattern and measurement changes at toile stage are unlimited until the block is approved; the sample stage includes two revisions as standard. A complete change of direction is treated as a new style.

Do you source fabric or should I supply it?

Either. We hold 40+ base colours in stock, or we propose alternatives by hand-feel, weight and composition across three tiers: same hand, same look, and custom weaving or dyeing. If you supply the fabric, we run CMT.

Will bulk match the approved sample?

Yes, provided the sample is sealed. The signed sample becomes the single production standard; pattern, fabric lot, shade and trims are archived; the first bulk piece is checked against it before cutting, and final inspection follows AQL 2.5.

Can I have the patterns after production?

Yes. On OEM orders the patterns belong to the brand and can be supplied as PDF or DXF for production elsewhere or for copyright registration.

Why is 50 pcs so much more expensive per unit than 500?

Fixed-cost dilution: fabric minimums, cutting lay depth and changeover time. Stock fabric, one style in several colours, and standardised trims pull the first-order price down — we quote quantity tiers side by side so the effect is visible.

How many styles should a first order cover?

One or two lead styles at 200 pcs each (blanks 30–50 to start). Prove the fit and construction first

Can you rush an order?

Yes — toile in as little as 3 days, bulk in 12–15 days, provided the fabric is in stock and the construction is unchanged. No rush surcharge, but it takes line capacity, so the slot must be confirmed in advance.

OEM / ODM · PandOrigin

Have a style to produce? Send us your references

Send a sketch, a sample or just an idea — we reply within 24 hours with MOQ, pricing and sampling advice.

Get a Quote WhatsApp